-
Description
Note: The Raspberry Pi 5, SSD or power adapter is not included in the packing list.
Overview
The M300 V1.1 shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.
User Manual: https://geekwormf.shop/M300
[Important Notes]
- Compatible with M.2 NVMe SSDs
- Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
- Older NVMe drives with less efficient flash media may not perform as well as newer drives
- New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer.
Features
- Supports installation of official active coolers also;
- Dual LED Indicators: 5V Power LED and 'ACT' (M.2 disk activity).
- Reserved CSI & Camera slot for CSI FFC.
- Supports 2230/2242 NVME M2 SSD only.
- Can Power the M300 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
Packing List
- 1 x M300 V1.3 NVMe SSD Shield
- 1 x PCIe FFC Cable(30mm length)
- 4 x M2.5x17mm F/F Spacers
- 8 x M2.5x5mm Screws
- 1 x M2x3mm Screws (to fix MVME M2 SSD)
